Please wait while the page loads...

2014 Chevrolet Traverse Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that tiny light on your vehicle’s dashboard suddenly illuminates, but in reality, it is not something that should cause you to shut down in fear right away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also established as the OBD (on-board computer diagnostic system) in your Traverse. There are hundreds of different codes that your check engine light can represent. While that sounds daunting, with a tiny patience, tackling crucial diagnostics will give you convenient knowledge about your vehicle and will also allow that Check Engine Light to do what it is actually supposed to do: be your guide. Unfortunately, conducive and marvelous vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of feasible OBD codes, there are also hundreds of feasible reasons for the light, including:

  • Old Battery
  • Bad Spark Plugs
  • Computer output circuit issues
  • Ignition system faults
  • Fuel and air metering systems problems
  • Transmission issues
  • O2 Sensor
  • Loose Gas Cap or Missing Gas Cap
  • Emissions controls issues

This is why it is gigantic for someone who does not have a lot of automotive knowledge to not assume what a code means. If the engine light comes on due to a harsh concern, you risk damaging your car diverse by not repairing the issue right away. When your check engine light comes on, you should get it checked out instantly by a certified Chevrolet technician. Call Bill Estes Chevy Indianapolis at 3176435230 today or schedule your check engine light service online today!

Will the check engine light reset itself?

The check engine light on your 2014 Chevrolet Traverse will naturally shut itself off if the issue or code that caused it to turn on is serviced. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going factual, and you did a lot of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2014 Chevrolet Traverse light will go off after about 20-40 miles. If you drive over that amount and the light is still on, you will need to bring it in to Bill Estes Chevy Indianapolis so the light and code can be double-checked and reset.

Check Engine Light Service 2014 Chevrolet Traverse

What do you do when you’re driving along in your Chevrolet Traverse and suddenly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Chevrolet owners, your heart sinks a small because you have small idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t mean you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your 2014 Chevrolet Traverse checked as soon as conceivable. Ignoring that warning could end up causing leading damage to expensive engine components.

When your 2014 Chevrolet Traverse's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t exact, a computer turns on your check engine light. This amber or yellow light is frequently labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is learn with an electronic scan tool that is used by our Chevrolet auto repair mechanics at Bill Estes Chevy Indianapolis. There are also a number of relatively inexpensive code readers that are designed for do-it-yourselfers, should you determine that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an professional professional to determine the issue and repair it.

2014 Chevrolet Traverse Check Engine Light

A flashing light suggests that the problem is hazardous and if not taken care of urgently may result in primary damage to the vehicle. If the check engine light in your 2014 Chevrolet Traverse starts flashing, that means that the problem needs immediate attention and your Chevrolet should be brought in urgently. This blinking light usually hints a draconian engine misfire allowing unburned fuel to be deposited into the exhaust system. There it can shortly increase the temperature of the catalytic converter to a point where wear and tear is achievable, requiring an expensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can absolutely be the cause. A bad, erstwhile or dirty spark plug can cause the engine to misfire. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a incredibly expensive repair. If your check engine light is flashing, please contact our team of automotive experts at Bill Estes Chevy Indianapolis immediately by calling 3176435230.

How many miles can you drive with the check engine light?

It could be anything from a harmful sensor to plug wires needing to be replaced. Since each check engine code has its own level of severity, it is laborious to predict how several miles you can commute with the warning light on. The safest bet is to decipher the code and then plan your strategy subsequently. If you check engine light is shining, we indicate that you pull over and contact Bill Estes Chevy Indianapolis to help find out if your vehicle is safe to commute in or if we indicate a tow truck.

How much does it cost to get the engine light checked?

The check engine light warns of issues ranging from a gas cap that's not properly tightened to a more relentless failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it good to get the correct code reading and diagnosis. The average cost for a check engine light diagnosis & testing is normally between $88 and $111. The good news, Bill Estes Chevy Indianapolis offers complimentary multi-point inspections and free diagnostics, in most cases, to aid find out the cause of your check engine light.

Is it safe to drive your 2014 Chevrolet Traverse with the check engine light on?

This question is not very straightforward because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be safe to drive. This is normally indicated by a steady glow of the check engine light. If you notice a difference in the performance of the vehicle, it could be an indication of a more relevant problem. If the check engine light is flashing, this means that there is a relevant issue and it is recommended to service your Chevrolet Traverse expeditiously. Call the mentors at Bill Estes Chevy Indianapolis by dialing 3176435230 so you can describe the issues. Or decrease your speed and bring your 2014 Chevrolet to our certified mechanics as soon as feasible.

2014 Chevrolet Traverse Check Engine Light Flashing

Although there are bountiful ability causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are countless normal causes encompassing something as authentic as a loose gas cap. Substitute normal reasons for a Check Engine Light are faulty head gasket, a malfunction with the fuel injection system, dirty mass airflow sensor, faulty emissions control part, damaged oxygen sensor, or defective spark plugs to name a few. No matter what is the root cause of the Check Engine Light, we have the Chevrolet Certified Technicians and the certified service protocol to isolate the root problem and repair it as mandatory to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Chevrolet issue was repaired.

Every 2014 Chevrolet Traverse was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its difficult systems. The sensors are continually detecting conditions while sending data to the electronic control unit. If the electronic control unit detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what definitely is wrong nor what to do about it. That’s where we come in; Bill Estes Chevy Indianapolis provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Exceedingly Qualified Service professional.

What could cause the check engine light to come on in a 2014 Chevrolet Traverse?

When your check engine light comes on, this could be as simple as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a perilous problem that could cause perilous damage to your engine and come with a gargantuan repair bill. Depending on your make and model, the check engine light will illuminate or blink. A steady glow typically means something less perilous but a flashing check engine light indicates that your vehicle’s engine is in perilous trouble and service is fundamental hastily. If your check engine light is flashing in your 2014 Chevrolet Traverse, we incredibly recommend not to drive the vehicle and schedule Chevrolet service today. Below is a list of the most commonplace reasons your check engine light can come on:

  • Your 2014 Chevrolet Traverse has a vacuum leak. Each Chevrolet Traverse has a vacuum system that performs a wide variety of functions. The vacuum system also helps premium harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can arid out and crack, especially if they’re exposed to large heat or extreme cold.
  • Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, admitted as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less forceful when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2014 Chevrolet Traverse's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to find out the right mixture of air and fuel that enters the cylinders in your engine. A bad O2 sensor can also cause a car to fail an emissions test.
  • The battery is low or dead. The battery in your 2014 Chevrolet Traverse is each hard. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did a few decades ago, and they don't really require maintenance. The price of a new one depends on the type of Chevrolet you drive, but check our contemporary service coupons and specials.
  • New Spark Plugs or Plug Wires are needed for your 2014 Chevrolet Traverse. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are bad or traditional, you will experience poor performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, considerable to more expensive repairs.
  • Issues with any aftermarket items. An aftermarket alarm, exhaust or other item can wreak havoc on your 2014 Chevrolet Traverse if it’s not installed appropriately. These aftermarket parts and accessories can drain the battery, trigger the check engine light, or even prevent the vehicle from starting. If these issues sound noted, bring your Traverse to Chevrolet and have our team of certified mechanics ensure that your aftermarket items were installed appropriately and aren't causing any issue. Getting accessories, especially aftermarket parts and accessories, or using OEM parts first place might cost a miniature bit more but could save you money from having to get poor work and damage caused by poor installation work corrected.
  • Your catalytic converter is bad or going bad. The catalytic converter is a part of your 2014 Chevrolet Traverse’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is ordinarily caused by neglected maintenance, which is why Bill Estes Chevy Indianapolis offers a complimentary multi-point inspection with each Chevrolet service. If you have an issue with your catalytic converter and don't get it repaired, your 2014 Chevrolet Traverse will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause other problems from overheating.
  • Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Chevrolet Traverse is what determines how much fuel is needed to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to genuine changes, like altitude. If your Chevrolet Traverse is having trouble starting, idling rough or has a fast change in the position of the throttle pedal, this could be a sign of a bad mass airflow sensor.
  • One of the most tolerable and frequent cause is that your 2014 Chevrolet Traverse gas cap is loose, damaged or missing. The gas cap for your 2014 Chevrolet Traverse serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a bad fuel cap? If your gas cap is traditional or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't expensive. If your check engine light turns on shortly after you put gas in your 2014 Chevrolet Traverse, first thing you should check is to make sure the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.

What Does the Check Engine Light Mean?

One of the most continually misunderstood lights or indicators in your 2014 Chevrolet Traverse is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in various odd ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light lights up in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a variety of things for your 2014 Chevrolet Traverse. Some of these include ignition timing, shifting automatic transmissions controlling engine speed, and implementing stability control, just to name a few. With that being said, the check engine light can express a variety of alternative things. It can be as easy as your gas cap being loose or as alarming as engine knocking. If your check engine light is on in your 2014 Chevrolet Traverse, contact Bill Estes Chevy Indianapolis. Our Chevrolet service department can help you find out what code is turning your check engine light on or analyze why your check engine light is flashing. Contact Bill Estes Chevy Indianapolis today!