2016 Chevy Traverse Check Engine Light

Will the check engine light reset itself?

The check engine light on your 2016 Chevy Traverse will generally shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going plausible, and you did a lot of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2016 Chevy Traverse light will go off after about 20-40 miles. If you drive over that amount and the light is still on, you will need to bring it in to Bill Estes Chevy Indianapolis so the light and code can be double-checked and reset.

Check Engine Light Service 2016 Chevy Traverse

What do you do when you’re driving along in your Chevy Traverse and suddenly, a yellow light brightens on your dash and says "Check Engine". If you’re like most Chevy owners, your heart sinks a little because you have little idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t indicate you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your 2016 Chevy Traverse checked as soon as probable. Ignoring that warning could end up causing important damage to costly engine components.

When your 2016 Chevy Traverse's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t honorable, a computer turns on your check engine light. This amber or yellow light is commonly labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is read with an electronic probe tool that is used by our Chevy auto repair mechanics at Bill Estes Chevy Indianapolis. There are also a number of comparatively inexpensive code readers that are designed for do-it-yourselfers, should you select that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an experienced professional to indicate the issue and repair it.

2016 Chevy Traverse Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that slight light on your vehicle’s dashboard hastily illuminates, but in reality, it is not something that should cause you to shut down in fear right away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also acknowledged as the OBD (on-board computer diagnostic system) in your Traverse. There are hundreds of extra codes that your check engine light can represent. While that sounds daunting, with a slight patience, tackling main diagnostics will give you great knowledge about your vehicle and will also allow that Check Engine Light to do what it is really supposed to do: be your guide. Unfortunately, conspicuous and agreeable vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of convenient OBD codes, there are also hundreds of convenient reasons for the light, including:

• Ignition system faults
• Fuel and air metering systems problems
• Bad Spark Plugs
• Emissions controls issues
• O2 Sensor
• Loose Gas Cap or Missing Gas Cap
• Old Battery
• Computer output circuit issues
• Transmission issues

This is why it is exciting for someone who does not have various of automotive knowledge to not assume what a code means. Call Bill Estes Chevy Indianapolis at 3176435230 today or schedule your check engine light service online today! When your check engine light comes on, you should get it checked out expeditiously by a certified Chevy mechanic. If the engine light comes on due to a risky concern, you risk damaging your car extra by not repairing the issue right away.

What Does the Check Engine Light Mean?

One of the most frequently misunderstood lights or indicators in your 2016 Chevy Traverse is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a few particular ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light brightens in either an amber or red color and is part of the diagnostics system found on your car. Onboard computers increasingly have controlled and monitored car performance since the 80s and do a variety of things for your 2016 Chevy Traverse. Some of these include ignition timing, controlling engine speed, shifting automatic transmissions and implementing stability control, just to name a few. With that being said, the check engine light can determine a variety of disparate things. It can be as factual as your gas cap being loose or as critical as engine knocking. If your check engine light is on in your 2016 Chevy Traverse, contact Bill Estes Chevy Indianapolis. Contact Bill Estes Chevy Indianapolis today! Our Chevy service department can aid you learn what code is turning your check engine light on or diagnose why your check engine light is flashing.

How many miles can you drive with the check engine light?

The safest bet is to decipher the code and then plan your strategy accordingly. It could be anything from a detrimental sensor to plug wires needing to be replaced. If you check engine light is flashing, we indicate that you pull over and contact Bill Estes Chevy Indianapolis to help designate if your car is safe to drive in or if we indicate a tow truck. Since each check engine code has its own level of severity, it is difficult to predict how many miles you can drive with the warning light on.

Is it safe to drive your 2016 Chevy Traverse with the check engine light on?

This question is not highly commonplace because it any depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be safe to drive. This is ordinarily indicated by a logical glow of the check engine light. If you notice a difference in the performance of the vehicle, it could be an indication of a more precarious problem. If the check engine light is flashing, this means that there is a precarious issue and it is recommended to service your Chevy Traverse quickly. Call the experts at Bill Estes Chevy Indianapolis by dialing 3176435230 so you can describe the issues. Or reduce your speed and bring your 2016 Chevy to our certified mechanics as soon as achievable.

What could cause the check engine light to come on in a 2016 Chevy Traverse?

When your check engine light comes on, this could be as plain as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a dangerous problem that could cause dangerous damage to your engine and come with a fabulous repair bill. Depending on your make and model, the check engine light will illuminate or blink. A natural glow constantly means something less dangerous but a flashing check engine light indicates that your vehicle’s engine is in dangerous trouble and service is needed urgently. If your check engine light is flashing in your 2016 Chevy Traverse, we excessively suggest not to drive the vehicle and schedule Chevy service today. Below is a list of the most natural reasons your check engine light can come on:

• Your mass airflow sensor (known as MAF) needs to be interchanged. The mass airflow sensor in your Chevy Traverse is what determines how much fuel is basic to run your engine efficiently by measuring the payment of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to hopeful changes, like altitude. If your Chevy Traverse is having trouble starting, idling rough or has a sudden change in the position of the throttle pedal, this could be a sign of a harmful mass airflow sensor.
• Your 2016 Chevy Traverse has a vacuum leak. Every Chevy Traverse has a vacuum system that performs a roomy variety of functions. The vacuum system also helps lower detrimental emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can arid out and crack, particularly if they’re exposed to exciting heat or extreme bitter.
• One of the most natural and many cause is that your 2016 Chevy Traverse gas cap is loose, damaged or missing. The gas cap for your 2016 Chevy Traverse serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a harmful fuel cap? If your gas cap is former or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't pricey. If your check engine light turns on expeditiously after you put gas in your 2016 Chevy Traverse, first thing you should check is to make sure the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
• The battery is low or dead. The battery in your 2016 Chevy Traverse is every hard. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did innumerable decades ago, and they don't surely require maintenance. The price of a new one depends on the type of Chevy you drive, but check our ongoing service coupons and specials.
• Your catalytic converter is harmful or going harmful. The catalytic converter is a part of your 2016 Chevy Traverse’s exhaust system. The catalytic converter's work is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is commonly caused by neglected maintenance, which is why Bill Estes Chevy Indianapolis offers a complimentary multi-point inspection with every Chevy service. If you have an issue with your catalytic converter and don't get it repaired, your 2016 Chevy Traverse will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause additional problems from overheating.
• Your O2 Sensor (Oxygen Sensor) needs to be interchanged. The Oxygen sensor, known as the O2 sensor, measures the payment of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less realistic when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2016 Chevy Traverse's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to choose the right mixture of air and fuel that enters the cylinders in your engine. A harmful O2 sensor can also cause a car to fail an emissions test.
• Issues with each aftermarket items. An aftermarket alarm, exhaust or additional item can wreak havoc on your 2016 Chevy Traverse if it’s not installed appropriately. These aftermarket components and accessories can jettison the battery, trigger the check engine light, or even prevent the vehicle from starting. If these issues sound famous, bring your Traverse to Chevy and have our team of certified technicians ensure that your aftermarket items were installed appropriately and aren't causing each issue. Getting accessories, particularly aftermarket parts and accessories, or using OEM components first place might cost a little bit more but could save you money from having to get poor work and damage caused by poor installation work corrected.
• New Spark Plugs or Plug Wires are basic for your 2016 Chevy Traverse. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are harmful or former, you will experience poor performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, finest to more pricey repairs.

How much does it cost to get the engine light checked?

The average cost for a check engine light diagnosis & testing is generally between $88 and $111. The specific news, Bill Estes Chevy Indianapolis offers complimentary multi-point inspections and free diagnostics, in most cases, to help imply the cause of your check engine light. The check engine light warns of issues ranging from a gas cap that's not correctly tightened to a more scrupulous failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it specific to get the suitable code reading and diagnosis.

2016 Chevy Traverse Check Engine Light

If the check engine light in your 2016 Chevy Traverse starts flashing, that means that the problem needs quick attention and your Chevy should be brought in hastily. A flashing light implies that the problem is rigorous and if not taken care of hastily may result in major damage to the vehicle. This blinking light usually hints a rigorous engine misfire allowing unburned fuel to be deposited into the exhaust system. There it can suddenly improve the temperature of the catalytic converter to a point where damage is viable, requiring an expensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can actually be the cause. A bad, classic or dirty spark plug can cause the engine to misfire. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a very costly repair. If your check engine light is flashing, please contact our team of automotive experts at Bill Estes Chevy Indianapolis instantly by calling 3176435230.

2016 Chevy Traverse Check Engine Light Flashing

Although there are copious space causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are frequent authentic causes incorporating something as easy as a loose gas cap. Extra authentic reasons for a Check Engine Light are faulty emissions control part, dirty mass airflow sensor, damaged oxygen sensor, faulty head gasket, a malfunction with the fuel injection system, or defective spark plugs to name a few. No matter what is the root cause of the Check Engine Light, we have the Chevy Certified Technicians and the certified service protocol to isolate the root problem and repair it as imperative to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Chevy issue was repaired.

Every 2016 Chevy Traverse was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its convenient systems. The sensors are frequently detecting conditions while sending data to the electronic control unit. If the electronic control unit detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what exactly is wrong nor what to do about it. That’s where we come in; Bill Estes Chevy Indianapolis provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Excessively Qualified Service professional.